GOLDEN FALCON ELECTRONIC.CO

Product Name & Model NO.: HTC-2

"Product Specififications：Temperature measurement range : -10 ºC ~ +50ºC (-14ºF ~ +122 ºF)

Temperature measurement accuracy : ±2 ºC (3.6ºF)

Temperature resolution : 0. 1 ºC (0.1ºF)

Humidity measuring range: 10%~99% RH

Humidity measuring accuracy: 10% RH

Humidity resolution : 1%

Battery: AAA 1.5V 1PCS

Basic functions：Temperature / Humidity

ºC / ºF temperature switch display

The maximum / minimum temperature

and humidity memory function

12/24 hour clock

The whole point time keeping function

Daily alarm

Calendar display

Operation manual：1. Push down battery cover “OPEN” on meter back side, and install battery.

2. Time setting: In the initial state, press [MODE] till there is a Di sound, and thenumber of minute start flflashing; press [ADJ] to adjust number, press [MODE] to setminute number; then the number of hour start flflashing. Repeat above steps to sethour number, and enter hour system setting. Press [ADJ] to choose ""12/24"" hoursystem, press [MODE] to set. Then it come to month (M) and day (D) setting, repeatabove steps to set date.

3. Alarm setting: In normal clock mode (the two points between hour and minuteflflash), press [MODE] once, switch the display for alarm clock mode (clock andminutes between two points in not flflashing). Press [ADJ] to switch "" "" (alarm) /""ALarm"" (hourly alarm) function; press [MODE] till there is a Di sound, and thenumber of minute start flflashing, you can set the alarm time (same steps as timesetting), press [MODE] once to exit alarm time setting. When alarm, meter sounds forone minute, or press any button to stop alarm; When hourly alarm, meter only sounds“DiDi”.

4. Press [MEMORY] button to display the MAX/MIN/Current temperature/humidity.

5. Memory clear function: in MAX or MIN state, press [MEMORY] for long time till aDi sound to clear MAX/MIN data."P